Tips For A Successful Security Camera Installation
Wednesday, July 23rd, 2008 Subscribe To Our Feed
The biggest drawback stopping many people from buying CCTV cameras is concerns about the actual security camera installation. Installing CCTV cameras can have its problems, but these can be avoided with some good planning.
What to do before buying a CCTV System
Ensure you are buying the right security system for your property. If you are unsure then a paid professional can do a survey and advise you of the best suited equipment and solve any potential problems you may have.
Dealing with power source problems
A common problem with security cameras is the lack of a nearby power source, especially for outdoor CCTV installations. It’s not very wise to step outside with your security camera system in hand only to discover that there’s no power source.
Know where your outlets are before you buy. If you know potential power problems up front, you can get good advice from sales representatives or even CCTV installers before you buy. Their expert suggestions may take you in an entirely different direction than you might have gone without it.
If access to a power source is a challenge to your security camera system installation, consider the following options. You can have power installed near where you plan to install your CCTV cameras. Alternately, you can run cables into an existing power outlet inside your garage. Or you can chose a CCTV camera that draws its power from a plug-in battery unit.
Security Lighting
Another problem with any outside security camera installation is lighting, or the lack of it. If you want to record an area at night, you need to ensure the area is well lit. You can do this by installing additional security lighting. Alternatively, there are many cameras with low light level capabilities, or even infrared night vision capabilities.
Climate Considerations
A sturdy weather proof protective casing is an essential option for any outside security camera system installation.
Depending on the climate in your location, you may need to consider the temperature ranges your system will need to endure. Not many CCTV cameras can work in extreme temperatures in hot climates, or very low temperatures in cold climates. Make sure the system you choose to install will work all year round in your climate.
Cabled or Wireless Cameras?
The final factor to preplan in any security camera installation is cables. Running cables from your camera to your control point can be the most time-consuming task for CCTV installers.
With the good reliability of today’s wireless camera systems, extensive and unsightly cabling may be unnecessary. If you are installing wireless security systems, you must still preplan your installation to ensure success.
The signal range of wireless cameras is normally adequate for most installations. Ranges do vary though and can be reduced by walls and obstacles between the receiver and the camera. Don’t be put off by the presence of walls or objects, just bear in mind the more objects there are, the shorter the distance can be between the receiver and the camera. You therefore need to plan beforehand what distances and what obstacles are in the path of the signal. If you are worried, go for wireless security systems with stronger signal strengths.
Ultimately, installing CCTV cameras is well within the capabilities of someone who is reasonably competent at DIY. Complications normally arise when someone buys a camera system that doesn’t suit their needs or situation. If you have assessed your requirements before your purchase and obtained competent advice, your security camera installation should go without problems, whether you DIY it, or use professional security camera installer.
For complete security camera advice, including the Ultimate Guide to Home Security, network security cameras and spy cameras, visit Security Camera Reviews.
Technorati Tags: cctv, home security, installation, security, security cameras
Related Tags: No Tags
Possible Related Posts
